Easy to use dipping system method - acrylic has never been so easy!

Simpler steps to achieve optimal results without a UV lamp and without leaking gels. It's now easier than ever to model your nails at home! Our dipping powder especially for thin, natural and stable models with maximum shine. Our instructions for the dipping system show you the individual steps.

Preparation

Wash and disinfect your hands and get started Preparation of natural nails. First, gently push yours cuticles back. To remove remaining cuticles, we recommend our Pro Pusher . If necessary, shorten the nails and file them into shape .

STEP 1:

Buff the nail carefully until the nail surface is completely matt. Now remove the dust with a brush . Then apply a thin layer of the Step 1 - Dipping System Primer . Let it dry for a few seconds!

STEP 2:

Now carefully apply a layer of the Step 2 - Dipping System Base to the entire nail and then immediately dip it into the Dipping System Powder clear . Make sure the entire nail is covered with powder. Then carefully tap off the excess powder from your finger. Now wait a few seconds and repeat this step until you
I like the structure of the nail.

STEP 3:

If you are happy with your nail, apply a layer of Step 3 - Dipping System Activator .
Allow this layer to dry. The nail can then be filed as desired.

STEP 4:

Now apply the Step 4 - Dipping System Finish to the finished modelling. You leave this for 30-60 seconds.
dry on the nail. Repeat the process until you get the desired shine.

STEP 5 & 6:

Then apply treatment to your nails. We recommend our Step 5 - Dipping System Nail Care .
To ensure that all brushes always deliver optimal results, We recommend these to you if necessary and at the end
Step 6 - Dipping System Brush Saver . This removes the remains of dipping system components and provides protection Bonding.

Full cover modeling

If you would like to use our dipping system color powder, then first follow STEP 1 & 2 of the basic instructions. 

STEP 2:

Now wear another layer of Step 2 - Dipping Carefully apply System Base to the entire nail and then immediately dip it into the Dipping System color powder of your choice. Make sure the entire nail is covered with powder. Then tap off the excess powder from your finger. 

Now wait a few seconds and repeat this step to get an even more intense color/effect result. You can repeat this step as often as you like until you like the result. Finish with a layer of the
Step 2 - Dipping System Base and then immediately dip it into the Dipping System Powder Clear . 

Make sure the entire nail is covered with powder. Then tap off the excess powder from your finger. 

Now you can continue with STEP 3 - 6 of the basic instructions. 

French modeling

For a classic French model, first follow STEP 1 of the basic instructions. 

STEP 2:

Apply a layer of the Step 2 - Dipping System Base carefully to the entire nail and dip only the tip of your nail into the Dipping System Powder White. Then dip the entire nail into the dipping system powder of your choice - 

For classic French modeling we recommend Dipping System Powder clear . Make sure the entire nail is covered with powder. 

Now you can continue with STEP 3 - 6 of the basic instructions.

Shop starter set here:

Dipping system starter set	Dipping System Starter Set Plus	Dipping System Starter Set Plus

Here to read:

We're here for you!